| |
Turn 2 Stats is in its first release. Unfortunately, we have not been able to package the application with a complete self-install routine, so the installation steps must be handled manually by the user. In subsequent editions, we intend (eventually) to have the process completely automated. Until then, here are the step by step instructions for downloading the self extracting zip file for PC.
From the main web site Download Trial page (or from the post purchase page) download the SELF EXTRACTING ZIP file named "TURN2.exe":
Choose the self extracting zip file. You will then see this page:
Click download, and you will then see a box like this:
Click Save. (DO NOT CLICK “RUN”.)
You will see the following box to determine what the file name should be, and where it should be saved. Keep the default name of TURN2.exe, and be sure it will be saved on your desktop. If the desktop is not the default location, please navigate through your computer drive to change it to desktop.
After you click save, the file will download to your desktop. You will see a dialog box showing the progress of the download. Be sure the box is unchecked for “close this dialog box when download completes.” Here is the progress box:
When complete, you will see yet another box. This time, click RUN.
Next, you will get a warning about the publisher. Click Run.
(Almost there.) Next, the unzip process begins by showing this box:
Click OK.
The self extractor program will begin with this box – Click Unzip:
After the unzip is complete, you will get a verification box:
Click OK. There will be a folder on your desktop named TURN2, and the software will launch for the first time after a delay of approximately 5 seconds. You will receive the OPEN TURN2STATS box:
Enter the name and password combination you have been given.
The software license agreement will show the first time you login:
If you accept, you will receive the thank you message which explains you will need to login once more:
After logging in, you will be delivered to the front page of the application.
FINAL HOUSEKEEPING:
On your desktop, there should be a TURN2 folder. If you open the folder, you will see it’s contents:
If you open the T2S folder, you will see it’s contents:
In this folder are two files named TURN2STATS. One has an extension of “exe” which is the application, and the other “usr” which is a system file. To launch Turn 2 Stats, double click on the application file. We recommend that you create a short cut to this file and place it on your desktop. Instructions to make a short cut are offered below:
Click once on the application to highlight and place the cursor over the file name:
Right click on the file name to open the short menu, and select “Create Shortcut”:
There will now be a short cut in the T2S folder named “Shortcut toTURN2STATS.exe”:
Click and drag this shortcut to your desktop. This shortcut should be used to start your application from now on. You may rename the short cut to any name you would like. To rename it, right click and select “Rename”, then type over with something shorter. We recommend T2 or T2S or Turn2. We also recommend that you drag the zip file (TURN2.EXE) from your desktop into the T2 folder.
For support inquiries, please contact support@turn2stats.com. We will give every inquiry our prompt attention. It is our goal to respond within 24 hours.